Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6.6 ft SAS cable with 26-pin SFF-8088 connectors on both ends, 30 AWG twinaxial construction, 100 Ohm impedance, and 6 Gbps per channel for external Mini-SAS links
This Vszerda cable connects two Mini-SAS 26-pin SFF-8088 ports with a 6.6 ft twinaxial assembly. Eight differential pairs carry up to 6 Gbps per channel at a controlled 100-Ohm impedance. The 30 AWG conductors keep the cable flexible for rack and server-to-enclosure runs. Hot-pluggable design allows insertion without powering down the subsystem.
Use this assembly when existing cables limit enclosure placement or when signal integrity drops at 6 Gbps speeds. The 6.6 ft length spans adjacent racks or connects a server to a nearby JBOD without strain. Shielded twinax construction reduces crosstalk that can cause errors on marginal links. It is not suited for internal backplane routing or for protocols outside the SAS family.
Under continuous multi-stream workloads the 100-Ohm impedance and low-skew pairs maintain eye opening across all eight lanes. EMI shielding prevents external noise from degrading link margin during prolonged transfers. The male-to-male connectors stay seated under vibration typical of dense storage shelves. No active equalisation is present, so very long runs beyond the specified length are not supported.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | H!Fiber.com |
| Product type | SAS |
| Product color | SFF-8088 to SFF-8088 |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 26 |
| Connector details | Sff-8088 to Sff-8088 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
The male SFF-8088 plug needs enough straight rear clearance for the latch to engage fully without putting strain on the 30AWG twinaxial cable.
Push each male SFF-8088 connector in until the metal latch clicks; the connection is not secure until you hear that click on both ends.
Replace the cable if the 26-pin SFF-8088 connectors show bent pins, the latch tabs are cracked, or the 30AWG twinaxial jacket has sharp kinks that cannot be straightened.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?