Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 cm OCuLink SFF-8611 male-to-male cable with 90° angled connectors carries PCIe 4.0 signals at 64 Gbps for external eGPU or SSD links
This 50cm cable connects two SFF-8611 4i male ports using the OCuLink standard. It carries PCIe 4.0 signals at up to 64Gbps for external GPUs or SSD enclosures. The 90-degree angled connectors fit tight spaces around the port. It is built for builders who need a short, high-speed link between compatible devices.
The cable transmits PCIe 4.0 traffic at 64Gbps over a 50cm run. Signal integrity depends on the quality of the mating ports and the host controller implementation. Active latching helps maintain contact under vibration. It will not compensate for a controller that cannot drive the full PCIe 4.0 rate or for ports wired to fewer lanes.
Verify that both ends present a free SFF-8611 4i female receptacle with enough clearance for the 90-degree plug. Confirm the host and device support PCIe 4.0 over OCuLink and that the lane count matches your bandwidth target. This cable does not convert to other connector types or protocols. Buyers who need a straight connector, a longer reach, or a different interface should select another product.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Xiwai |
| Product type | PCIe |
| Product color | Black |
| Performance | |
| Rated speed | 64 Gbit/s |
| Ports & slots | |
| Connector count | 4 |
| Connector details | Pcie |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High-Speed Data |
This model is only offered as a 50 cm cable with 90° left-angled SFF-8611 male connectors on both ends; no other lengths or straight versions are listed.
The 64 Gbps figure is the aggregate bandwidth of four PCIe 4.0 lanes carried over the OCuLink SFF-8611 interface, matching the full x4 link speed.
The cable uses the OCuLink SFF-8611 connector to carry PCIe 4.0 signals, capping the link at four lanes and 64 Gbps total throughput.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?