Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects SAS or SATA devices at 12 Gbps per lane with sideband support, 0.5 m long
This 0.5 m internal cable connects NVMe backplanes or RAID cards using SFF-8643 Mini SAS HD connectors. It carries four lanes rated at 12 Gbps each for an aggregate 48 Gbps bandwidth. Sideband signalling is included for drive status and hot-swap control. The 100-ohm construction supports SAS, NVMe and SATA protocols.
Suits integrators wiring NVMe U.2/U.3 backplanes to RAID controllers or HBAs inside a 1 U or 2 U chassis where a short 1.6 ft reach is sufficient. The sideband wires enable hot-swap LED and enclosure management functions. Not for connections that require a longer run between rack units or external enclosures.
The cable is specified at 12 Gbps per differential pair, giving 48 Gbps total throughput across the four-lane SFF-8643 interface. This rating determines whether the link can saturate modern NVMe SSDs or SAS SSDs without becoming the bottleneck.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
At 0.5 metres (1.6 ft) it is designed for close-proximity connections inside a rack or server, so it fits typical 1U and 2U internal routing.
Each end is keyed; align the notch on the plug with the slot on the port and press straight in until the latch clicks — forcing it upside-down bends the sideband pins.
No fixed interval; inspect the latch and connector pins during drive swaps and replace the cable if you see bent pins, cracked housing or intermittent link errors.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?