Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects SFF-8644 and SFF-8088 SAS devices at 6.0 Gbps over 3.3 ft with 100-Ohm impedance
This new Vszerda cable connects a Mini SAS HD SFF-8644 port to a standard SFF-8088 connector. It uses AWG30 twinaxial eight-pair wire with 100-ohm impedance to deliver 6.0 Gbps per lane. The assembly is one metre long including both male connectors. It is built for external RAID, server and data-centre links.
The cable targets administrators who need a short, certified external run between a RAID controller or HBA and an external enclosure. It supports SAS 2.1 drive performance and complies with SAS 3.0 specifications. Builders working entirely inside a chassis or requiring a different connector pairing should look elsewhere.
Each lane is tested to 6.0 Gbps before shipment, meeting SAS 2.1 and 3.0 interface requirements. The 100-ohm controlled-impedance twinax construction keeps skew low across the eight differential pairs. This speed rating is the decisive figure when matching the cable to a controller or enclosure port.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | SAS |
| Product color | 1PC |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 8 |
| Connector details | Sff-8644 to Sff-8088 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
The cable is certified for Serial Attached SCSI 6.0 Gbps and compliant with SAS 2.1 and SAS 3.0 specifications, so each lane runs at 6.0 Gbps.
Each connector measures 9.09 x 8.31 x 0.71 inches, so allow that space at both ends for the male-to-male plugs to seat fully.
Align the keyed SFF-8644 and SFF-8088 male connectors, push straight in until the latches click, then verify link lights; the missed step is not confirming both latches are fully engaged.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?