Vszerda Shield PCIe 5.1 GPU Extension Cable 90° 12V-2x6 16pin 12VHPWR RTX 40/50 Series Black
PCIe 5.1 GPU extension cable with a 90° 12V-2x6 adapter, 16AWG wire and soldered joints for stable 600W delivery to RTX 40/50 series cards
- Sleek shield design enhances build aesthetics
- Highly flexible 16AWG cables simplify routing
- Compact 90° adapter fits tight ITX/ATX spaces
- Soldered joints maintain stable connections under stress
- Supports 600W+ for RTX 40/50 series cards
Shield-design GPU extension cable
The Vszerda Shield cable extends a 12V-2x6 12VHPWR connection from the power supply to the graphics card. Its 90-degree adapter and 16AWG wires suit compact ITX and ATX builds where space behind the GPU is limited. Soldered joints and included combs keep the run tidy and secure.
Replaces a straight 12VHPWR lead
The right-angle plug clears side-panel glass and tight clearance zones that a standard connector cannot. The upgrade is worth it when the stock cable forces a sharp bend or presses against the case window. Not recommended for RTX 5090 installations because of extreme power spikes.
Fits ATX 3.1 power supplies
The cable carries over 600 W under the ATX 3.1 12V2x6 spec, freeing routing space behind the motherboard tray. It requires a PSU with a native 12V-2x6 or 12VHPWR port and a graphics card with the matching 16-pin receptacle. Builders needing multiple GPU power cables should plan separate runs.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 67% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 90-degree 12V-2x6 adapter need behind the graphics card?
The compact 90-degree angle adapter is designed for ITX and ATX builds, letting the cable turn tightly against the card so it fits in narrow cases without pressing against the side panel.
Which orientation of the 16-pin 12VHPWR connector clicks securely into the RTX 40 series card?
Insert the connector with the latch facing the card’s PCB until you hear a firm click; the soldered joints and 16AWG wires keep the pins aligned so the latch engages fully without gaps.
When should the extension cable be inspected or replaced to stay safe with a 600 W load?
Check the soldered connections and cable insulation whenever you reseat the GPU or after any build move; replace the cable if you see melted pins, cracked sheathing or a loose latch on the 12V-2x6 plug.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





