Vszerda Shield Series 8-Pin PCIe GPU Power Adapter 180-Degree U-Turn Reverse Type Black
An 8-pin PCIe GPU power adapter with a 180-degree U-turn reverse connector and aluminium housing for improved heat dissipation and cable management
- Shield-inspired design adds visual appeal to your system
- 180-degree U-turn connector fits tight GPU clearances
- Aluminium housing with thermal vents improves heat dissipation
- New terminals ensure stable power delivery under full load
- Optimised cable routing enhances internal airflow
8-Pin PCIe Power Adapter for GPU Builders
This Vszerda Shield Series adapter connects a standard 8-pin PCIe power cable to a graphics card that requires an 8-pin connector. The 180-degree U-turn reverse-type design routes the cable back toward the motherboard, helping builders achieve a cleaner internal layout in tight cases. It is sold as a single black unit with an aluminium housing.
Replaces Straight 8-Pin Connectors When Clearance
A straight 8-pin plug often presses against a side panel or forces a sharp bend in the cable, which can strain the GPU socket over time. This adapter is worth fitting when the graphics card sits close to the case window or when adjacent components leave no room for a gentle cable curve, letting the wire run parallel to the board instead of jutting out.
Limited to 8-Pin PCIe Devices
The connector works only with hardware that uses an 8-pin PCIe power socket, so it cannot serve 6-pin, 12VHPWR or proprietary power inputs. The reverse-type 180-degree angle is moulded into the adapter and cannot be rotated to 90 degrees or a standard orientation, so the builder must confirm the GPU’s socket layout matches this fixed direction before purchase.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 180-degree U-turn connector need behind the graphics card?
The 180-degree U-turn bends the cable back toward the motherboard, so allow enough space between the card's rear edge and the side panel or drive cage for the connector to sit without forcing the cable.
What is the correct orientation when plugging the reverse-type adapter into an 8-pin GPU socket?
Align the adapter's keyed shroud with the GPU's 8-pin header so the latch clicks on the correct side; the reverse-type layout mirrors a standard plug, so forcing it the other way will damage the pins.
Does the aluminum housing require any thermal paste or periodic cleaning to maintain heat dissipation?
No thermal paste is needed; the aluminum shell uses integrated venting channels for passive airflow, so occasional dust removal with compressed air is the only upkeep.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





