Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one 8i SlimSAS port into two 4i connectors at 24 Gbps over 0.5 m for PCIe 4.0 storage links
This internal SlimSAS cable splits a single SFF-8654 8i connector into two SFF-8654 4i connectors. It carries SAS and PCIe 4.0 traffic at 24 gigabits per second over a 0.5 metre ribbon assembly. The 85-ohm impedance and 48 conductors suit servers, workstations and datacentre storage links where space is tight.
Signal integrity is specified for 0.5 metre; longer runs are not covered by the supplied data. The cable complies with the T10 Serial Attached SCSI standard extended for PCIe 4.0, so it handles both storage and add-in card traffic. Builders needing greater reach or a different lane split must choose another assembly.
The straight-to-straight, male-to-male connectors plug directly into backplanes or controller ports without adapters. Ribbon construction allows tight bends, but sharp folds can damage the 85-ohm lines. Verify keying on each 4i port before seating; forcing a misaligned connector is the usual cause of bent pins or intermittent links.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | Internal SlimSAS Cable |
| Performance | |
| Rated speed | 24 Gbit/s |
| Ports & slots | |
| Connector count | 48 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
The 0.5 m version keeps cable routing tight in dense 1 U or 2 U servers, while the 1.65 m option reaches across larger 4 U chassis or between adjacent racks without slack.
Each of the eight lanes runs at 24 Gbps, so an 8-lane controller can deliver the full PCIe 4.0 x8 or SAS-4 throughput to the connected backplane or drives.
The cable follows the T10 SAS-4 specification and is extended for PCIe 4.0, limiting each lane to 24 Gbps with 85-ohm impedance.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?