Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extends a U.2 NVME link with a 68-pin SFF-8639 male-to-female adapter supporting PCI Express 4.0 at 8 GB/s
This Vszerda adapter extends a U.2 SFF-8639 connection using a 68-pin male-to-female layout. It carries PCIe signals to a 2.5-inch NVMe SSD without changing the electrical interface. The board is built for high-speed shielding to protect signal integrity. It suits builders who need to route a U.2 drive away from the motherboard or backplane.
The adapter supports data rates up to 8 GB/s with PCIe 4.0 and 4 GB/s with PCIe 3.0. It replaces a direct motherboard-to-drive cable when the drive must sit in a remote bay or enclosure. The jump is worth it when cable length or routing constraints prevent a native connection. It does not add protocol conversion or signal retiming.
The male end plugs into the host U.2 port while the female end accepts the drive connector. No extra power connectors are present on the adapter board. It frees up motherboard slot space by allowing the SSD to be mounted elsewhere in the chassis. Builders needing hot-plug support or multi-drive backplanes should verify their platform provides those features separately.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Xiwai |
| Product type | PCI-E |
| Ports & slots | |
| Connector details | Sff-8639 |
| Connector gender | Male-to-Female |
| Size & build | |
| Cable shielding | High Speed |
The straight 68-pin male connector requires enough depth behind the 2.5-inch drive for the PCB to sit flat; allow at least the board length plus cable bend radius so the latch engages fully.
Align the keyed notch on the 68-pin male plug with the drive receptacle before pressing straight in; angling the connector bends pins and prevents the latch from clicking.
Check the gold fingers and latch for dust, bent pins or cracked PCB after every drive swap; replace the adapter if contact wear appears or if the latch no longer holds the 68-pin plug firmly.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?