Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type E header to a USB 3.0 19/20-pin header with an included SATA power cable for front-panel devices
This adapter connects a motherboard USB 3.1 Type E header to a USB 3.0 19 or 20-pin header on a front panel or hub. It includes a SATA power cable to supply the converted port. The copper construction carries data and power between the two header types. It is intended for PC builders adding front-panel USB 3.0 ports to a newer motherboard.
The USB 3.0 19/20-pin side operates at up to 5Gbps and supports two-way data transmission. That bandwidth is ten times faster than USB 2.0 but lower than the native USB 3.1 Gen 2 ceiling. The adapter does not increase the signalling rate of the connected device beyond the USB 3.0 specification. Cable length and signal quality may further reduce real-world speed.
Verify that your motherboard provides a USB 3.1 Type E host header before ordering. Ensure the front-panel cable or hub uses a standard USB 3.0 19 or 20-pin connector. A free SATA power connector from the PSU is required for the adapter to function. Builders needing internal USB 3.1 Gen 2 front-panel support cannot use this adapter for that purpose.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Chenyang |
| Size & build | |
| Build details | Copper |
This single model U3-084-EF+UC-117 converts a motherboard USB 3.1 Type E host socket to a USB 3.0 19/20-pin Type E header and includes a SATA power cable for the front panel.
The link runs at USB 3.0 5 Gbps, so front-panel ports, hubs or card readers connected to the 19/20-pin header will transfer data at up to that rate in both directions.
The 19/20-pin Type E header accepts most USB 3.0 front-panel cables, hubs and card readers, while the included SATA power cable supplies the necessary auxiliary power.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?