Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one internal USB 2.0 9-pin header into four ports for fans, controllers and RGB accessories using a 30 cm cable with adhesive mounting
This Vszerda adapter expands a single motherboard USB 2.0 9-pin header into four internal USB 9-pin ports. It uses an FE1.1S chipset to support data transfer at up to 480 Mbps. The hub is intended for PC builders who need extra internal connections for case fans, RGB controllers or similar accessories. It includes self-adhesive backing for tidy mounting inside the chassis.
Verify that your motherboard provides a standard USB 2.0 9-pin female header for the input connection. The hub draws its power from that header and can deliver up to 5 V 500 mA in total across the four outputs. Ensure the combined current draw of all attached devices does not exceed this limit. The package includes a 30 cm (1 ft) cable to link the motherboard header to the hub.
The adapter is a passive electronic device with no moving parts, so it produces no audible noise during operation. Power consumption is limited to the USB 2.0 specification of 5 V 500 mA supplied by the motherboard header. Heat generation is minimal and typically imperceptible inside a ventilated case. No additional cooling or external power supply is required.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
The package includes the internal USB 2.0 hub, a 30 cm 9-pin female-to-dual-female splitter cable and a self-stick adhesive pad; no extra cable is required.
It converts one motherboard USB 2.0 9-pin header into four male 9-pin headers for fans, controllers or RGB accessories.
The hub uses a FE1.1S chipset and supports USB 2.0 high-speed mode at 480 Mbps and full-speed mode at 12 Mbps, with each port limited to 5 V 500 mA power output.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?