Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Right-angle USB 2.0 Type A to Type B cable connects printers or scanners in tight spaces, supports 480 Mbps transfer, gold-plated contacts, foil and braid shielding, 1.5 m length
The Vszerda cable connects a standard USB Type-A port to a right-angled Type-B port on printers, scanners, all-in-one units, servers or external hard drives. Its 1.5 metre length suits desktop or notebook setups where the peripheral sits close to the host. Gold-plated contacts and foil-plus-braid shielding are used to reduce signal loss and electromagnetic interference. The moulded 90-degree bend lets the connector fit into tight rear-panel spaces without stressing the port.
The link operates at the USB 2.0 High-Speed ceiling of 480 Mbps, so bulk-endpoint transfers such as multi-page print jobs or scanner uploads run at the full protocol rate rather than falling back to Full-Speed 12 Mbps. Because the connection is wired, latency and jitter remain constant regardless of local radio congestion, unlike wireless alternatives. Backward compatibility with USB 1.0 and 1.1 hosts means older legacy ports will still enumerate the device, though at their native lower signalling rates.
The Type-B plug is not mechanically compatible with USB 3.0 Type-B receptacles, so the cable cannot be used on SuperSpeed-only peripheral ports. Maximum cable length for reliable High-Speed operation is defined by the USB 2.0 specification at 5 metres; this 1.5 metre assembly stays well within that bound. No external driver installation is required on supported operating systems from Windows 98 through Windows 7 and Mac OS 9.0 or higher, as the device uses the standard USB printer/class drivers already present in those systems.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Product type | USB |
| Performance | |
| Rated speed | 0.48 Gbit/s |
| Ports & slots | |
| Connector count | 9 |
| Connector gender | Male-to-Male |
| Size & build | |
| Build details | Gold |
| Compatibility | |
| Apple compatibility | Laptop |
The cable is passive with gold-plated contacts and foil/braid shielding; it adds no active components, so heat and power draw remain the same as a straight USB 2.0 link.
Your computer needs a standard USB Type-A port and the printer needs a USB Type-B port; the cable is USB 1.0, 1.1 and 2.0 compatible and works plug-and-play on Windows 98 through 7 and Mac OS 9.0 or higher.
The cable is backward-compatible with USB 1.0 and 1.1, so the older scanner will operate at its native speed without errors.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?