Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 30 cm USB 2.0 to 90° DC 3.5×1.35 mm boost cable converts 5 V input to 12 V output at up to 10 W for charging small devices
This 30 cm cable converts a USB 2.0 male port into a 90° DC 3.5×1.35 mm male plug, stepping 5 V input up to 12 V output. It suits routers, desk lamps, mini fans, Bluetooth speakers and similar small electronics that draw power from a USB adapter or power bank. The two-core design handles charging only and cannot carry data.
The cable is rated for a maximum input current of 2 A and a maximum output of 0.8 A at 12 V, giving a 10 W ceiling. Under continuous use the oxygen-free copper conductors keep resistance low and heat transfer minimal, while the indicator light confirms active operation. Exceeding the stated current or voltage limits will cause the connected device to stop working.
A standard USB 2.0 port supplies 5 V, so the built-in boost circuitry is essential to reach 12 V for the barrel jack. The 10 W maximum means the cable cannot run higher-wattage equipment, and the fixed 3.5×1.35 mm plug fits only devices with that exact jack size. Users must verify their equipment matches both the voltage and the connector before purchase.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ZdyCGTime |
| Product type | USB |
| Product color | 90°/0.3M |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable length | 1 ft (0.3 m) |
| Overall length | 1 ft (0.3 m) |
| Build details | Copper |
| Compatibility | |
| Apple compatibility | Speaker |
The cable uses 22 AWG oxygen-free copper and is described as having low heat transfer, so it stays cool during continuous operation at up to 10 W.
You need a USB 2.0 port or adapter that can supply 5 V at 2 A to deliver the full 12 V 0.8 A output.
The cable outputs a fixed 12 V, so it is not suitable for a 9 V device; check that your lamp accepts 12 V before connecting.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?