Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 cm braided USB 2.0 Type B extension cable with a 90-degree male plug and a panel-mount female end secured by screws
This 50 cm braided cable provides a USB 2.0 Type B male connector on one end and a screw-mount Type B female port on the other. It is built for printers, scanners and external hard-disk enclosures that need a fixed bulkhead connection. The 28 AWG copper conductors handle standard USB 2.0 data rates while the braided jacket resists wear in tight enclosures.
Use this assembly when the original device cable is too short to reach a rear-panel cut-out or when a removable panel interface is preferred over a trailing cord. The right-angled male plug reduces strain in shallow chassis and the 90° orientation keeps the cable close to the mounting surface. It is not suited for USB 3.0 or higher speeds, so devices that require SuperSpeed bandwidth need a different cable.
The braided shielding and screw-secured female port maintain signal integrity during long print jobs or sustained disk transfers. Heat buildup remains minimal because USB 2.0 current limits are low and the 28 AWG conductors are adequate for the spec. The panel-mount screws prevent vibration from unseating the connection in rack or kiosk installations.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Chenyang |
| Product type | USB |
| Ports & slots | |
| Connection type | Usb 2.0 |
| Connector count | 4 |
| Connector details | Usb 2.0 |
| Connector gender | Male |
| Size & build | |
| Build details | Copper |
The connector uses a standard USB 2.0 Type B panel-mount footprint; allow roughly 3.94 x 3.94 inches of clearance for the flange and screw holes.
Route the 50 cm braided cable so the right-angled plug inserts straight into the host port, then secure the female end with the two mounting screws before tightening.
Replace it if the braid frays, the right-angle plug wobbles in the port, or data transfers become intermittent after repeated panel mounting cycles.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?