Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.0 19/20-pin header to a USB 3.1/3.2 Type-E front-panel connector supporting 10 Gbps data transfer
This adapter converts a motherboard's internal USB 3.0 19 or 20-pin header into a USB 3.1/3.2 Type-E A-Key female connector. It supports data transfer speeds up to 10Gbps and features a straight 180-degree form factor. The device is designed for builders adding a USB Type-C front panel port to a chassis. No driver installation is required for operation.
This product replaces a direct USB 2.0 header connection which is explicitly not compatible with the adapter. The upgrade is worth it when a motherboard has a spare USB 3.0 19-pin header and the builder needs a Type-E interface for a modern front panel. It bridges the internal header gap without requiring a new motherboard purchase. Systems running Windows XP through Windows 10 32/64-bit, Mac, or Linux are supported.
Before ordering, confirm the motherboard provides a USB 3.0 19-pin or 20-pin IDC header and not a USB 2.0 variant. The adapter must be installed in a specific sequence: power off the tower, unplug it, wait ten seconds, orient the male end correctly, then plug the adapter into the USB 3.0 header. Incorrect installation order risks pin shorting, non-recognition, or power warnings.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
The adapter uses a USB 3.0 internal 19/20 pin male housing header that matches common motherboard USB 3.0 19 pin headers.
Power off the tower, unplug it, wait 10 seconds, install the male end for USB C in the correct orientation, then plug the adapter into the USB 3.0 header.
The adapter is plug and play with no driver install needed for WINXP, WIN7, WIN8, WIN10 32/64BIT, MAC or Linux.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?