Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard 19/20 pin header to a Type-E A-Key front-panel connector for 10 Gbps data transfer
This adapter converts a motherboard USB 3.0 19-pin or 20-pin header into a USB 3.1/3.2 Type-E A-Key female connector. It enables front-panel USB-C connectivity for chassis brackets that require the newer header standard. The unit supports data transfer speeds up to 10Gbps and operates on a plug-and-play basis without driver installation.
The adapter suits system builders who have a spare USB 3.0 internal header and need a Type-E connection for a modern front-panel bracket. It works with Windows XP through 10, macOS and Linux on both 32-bit and 64-bit architectures. Buyers whose motherboards only offer USB 2.0 internal headers cannot use this product, as the pin-out and signalling are incompatible.
Verify that the motherboard provides a USB 3.0 19-pin or 20-pin IDC header before ordering. The adapter must be fitted with the system powered off, unplugged and left for ten seconds; the male end should be oriented correctly before the adapter is seated on the header. Following a different sequence risks pin shorts, non-detection or over-current warnings.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
You need a USB 3.0 19 pin header on the motherboard for the male end of the adapter.
No, it is not compatible with USB 2.0 motherboard IDC connectors and requires a USB 3.0 header.
Connect a USB 3.1 or 3.2 Gen 2 device to the front panel Type-E port and verify the operating system reports a 10Gbps link speed.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?