Tripp Lite U022-015 USB 2.0 A to B cable 15 ft
- USB A to USB B
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 14.7 cm USB 3.0 19-pin male-to-female extension cable for internal motherboard headers, 24 AWG pure copper, solves clearance issues with graphics cards or radiators
This 19-pin male-to-female cable extends a motherboard USB 3.0 header by 14.7 cm so the front-panel connector can reach past large graphics cards or coolers. The 24 AWG pure copper conductors keep the signal clean over the short run. It is intended for builders whose chassis USB 3.0 plug cannot seat because the header sits under a long expansion card. The cable solves that clearance problem without adding bulk.
Push the female end onto the motherboard header and the male end into the case front-panel plug; both are keyed so they only go one way. The short 14.7 cm length leaves little slack, so route it before seating the graphics card or radiator. A frequent issue is bending the delicate header pins if the cable is forced at an angle — align carefully and press straight down. Professional installation is recommended by the supplier to avoid pin damage.
Verify that your motherboard uses a standard 19-pin USB 3.0 header; some brands use a different pinout or a shrouded connector that will not mate. Measure the distance from the header to the obstruction to confirm 14.7 cm is enough — longer runs need a different cable. Ensure the case front-panel plug is a matching 19-pin male type; older cases may have a 20-pin or proprietary connector. This cable does not add power delivery or change the USB 3.0 specification.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Plug a USB 3.0 device into the chassis front-panel port; the operating system should enumerate it at USB 3.0 speeds and transfer data without errors, confirming the 19-pin link is active.
The box contains one 14.7 cm 19-pin extension cable; you only need a motherboard with a 19-pin USB 3.0 header and a compatible chassis front-panel connector — no extra cables or adapters are included.
The 14.7 cm (5.8 in) 24 AWG pure-copper cable is the only length offered; its short profile is designed to clear bulky components while reaching the chassis USB 3.0 plug.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?