Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a USB 3.1 Type-C port into two internal 9/10-pin USB 2.0 headers with a built-in hub chip running at 480 Mbps and 500 mA per port
The Vszerda adapter converts a USB 3.1 Type-C host port into two USB 2.0 9-pin or 10-pin motherboard headers. It is designed for builders who need internal USB 2.0 connections from an external Type-C connector. The package includes the adapter, a cable and a small PCBA. It suits desktop systems where front-panel or internal USB 2.0 devices must be driven from a Type-C source.
A USB 2.0 hub chipset inside the adapter limits each header to 480 Mbps, matching the USB 2.0 specification. The adapter supplies DC 5 V at 500 mA to each port continuously, so connected devices receive steady power during extended transfers. Because the link is bounded by USB 2.0 signalling, sustained loads do not exceed this rate and the hub does not negotiate higher speeds. Thermal behaviour is passive; the compact PCB has no active cooling and relies on chassis airflow.
The adapter plugs directly into a USB 3.1 Type-C port and the two 9-pin headers mate with standard motherboard connectors. Pre-applied glue on the back lets the PCBA stick to the motherboard or chassis, reducing cable strain in tight spaces. No drivers or extra power cables are required. Misalignment of the 9-pin or 10-pin header is the most common issue; pins must match the motherboard keying exactly or the connection will fail. The short tether cable limits routing flexibility in large cases.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The adapter uses a USB 2.0 HUB chipset limited to 480Mbps and supplies DC 5v 500ma per port, so total draw stays at or below 1 A and heat remains minimal.
You need a free USB 3.1 Type-C host port on the motherboard or front-panel header; the adapter plugs directly into that port and requires no extra power cable.
Yes, each header is a standard 9-pin USB 2.0 connector, so existing front-panel cables or 10-pin to 9-pin adapters will plug in and run at 480Mbps.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?