Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type-E header into two 9-pin USB 2.0 ports with 480 Mbps speed and 500 mA each
This adapter converts a motherboard 20-pin USB 3.1 Type-E front-panel header into two standard 9-pin USB 2.0 headers. It includes a Type-E cable, a Type-A cable and a small PCBA with a USB 2.0 hub chipset. The assembly plugs directly into the motherboard and is secured with adhesive backing for a permanent internal fit.
The device is useful when a case provides more front-panel USB ports than the motherboard has native headers. It splits one Type-E connector into two 9-pin connections, each delivering up to 480 Mbps and 500 mA at 5 V. The jump is worth it when you need to connect both front-panel ports without sacrificing a rear I/O bracket or adding a PCIe card.
Verify the board has a 20-pin Type-E header and that your front-panel cables use standard 9-pin, 10-pin or 4-pin IDC connectors. The adapter only operates at USB 2.0 speeds despite the Type-E input, so devices requiring 5 Gbps or 10 Gbps will not reach those rates. Builders needing more than two ports or full USB 3.0 bandwidth should look elsewhere.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
Yes, the Type-E connector is designed to plug directly into a 20-pin USB 3.1 front-panel header on the motherboard.
Reversing the 9-pin connectors on the USB 2.0 headers; the keyed pin must align with the missing pin hole on the board.
The supplied back glue is intended for direct fixing to the motherboard or chassis; clean the surface first for a lasting bond.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?