Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type E header into two USB 3.0 19/20-pin headers with SATA power for front-panel devices
This adapter connects a motherboard USB 3.1 Type E header to two USB 3.0 19/20-pin headers. It includes a SATA power cable to supply the extra current needed by dual ports. Builders adding front-panel USB 3.0 ports to a board with only a Type E connector can use this single-piece solution. The copper construction carries the 5 Gbps signalling specified for USB 3.0.
The SATA power feed keeps both 20-pin outputs stable when two devices transfer data at the same time. Without the extra power, a single Type E header can sag under combined load and cause disconnects. The adapter supports simultaneous two-way traffic on each port at the full 5 Gbps rate. This prevents the speed drops that appear when a hub shares one upstream lane between multiple front-panel devices.
Confirm the motherboard provides a USB 3.1 Type E header, not a standard USB 3.0 19-pin or USB 2.0 header. Check that the case front-panel cables use the 19/20-pin keying matched by this board. Ensure a spare SATA power connector is available from the power supply for the adapter's auxiliary cable. The package measures 1.97 by 1.97 by 0.39 inches and weighs 8 grams.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Chenyang |
| Size & build | |
| Build details | Copper |
The board is a passive copper PCB with no active components, so it adds negligible heat and draws only the tiny current the connected USB 3.0 devices request.
A USB 3.1 Type E header on the motherboard and a free SATA power connector from the PSU to supply the extra cable.
Yes, each output header accepts both 19-pin and 20-pin plugs, so legacy front-panel cables connect directly.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?