Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds a front-panel USB-C port by converting a motherboard Type-E header, includes a full-height PCI bracket and 50 cm cable, supports up to 20 Gbps when the header provides USB 3.2 bandwidth
This 50 cm cable adds a USB-C female port to a desktop by connecting to the motherboard USB 3.1 Type-E header. It is aimed at builders who want front-panel access for Type-C flash drives, phones or hubs without replacing the case. The full-height PCI bracket mounts in a standard expansion slot for a clean installation.
The passive cable assembly draws no extra power and adds no active cooling, so system thermals and acoustic profile remain unchanged. Shielded construction with dual-layer EMI/EFI protection keeps signal integrity stable at the rated 10 Gbps or 20 Gbps link speeds. No driver is required, leaving CPU and chipset load unaffected.
A motherboard USB 3.1 Type-E header is mandatory; the port will fall back to USB 2.0 or 3.0 speeds if the header is adapted from an older standard. The bracket fits only full-height slots, so mini-ITX or low-profile cases are not supported. The 50 cm length reaches front-panel cut-outs in typical ATX chassis while leaving internal routing flexible.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | XRIKUI |
| Model name | XRK012 |
| Ports & slots | |
| Connector count | Classic |
| Size & build | |
| Conductor type | Metal |
| Build details | Metal |
| Compatibility | |
| Apple compatibility | Classic |
Plug the Type-E male connector into the motherboard USB 3.1 Type-E header, then secure the full-height PCI bracket to the case rear slot; the step often missed is verifying the motherboard actually has a native Type-E port rather than a converted USB 2.0 or 3.0 header.
The cable itself has no moving parts and requires no scheduled maintenance; only replace it if the metal shielding is damaged, the Type-C female port becomes loose, or the 50 cm length no longer reaches the motherboard header after a case change.
The bandwidth ceiling of the motherboard Type-E header — typically USB 3.1 or 3.2 — caps the Type-C port speed, so sustained throughput cannot exceed what that header provides.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?