Vszerda USB to RS232 Serial Adapter PL2303 10 FT
Connects serial DB9 devices to a USB 2.0 port with a 10 ft cable using the PL2303 chipset
- Connects legacy serial devices via USB 2.0
- PL2303 chipset supports Windows 11, 10, 8.1, 7, Linux, Mac OS
- 10 ft cable reaches equipment without extension
- Triple-shielded tinned copper conductor ensures reliable data transfer
- USB bus powered — no external adapter required
USB-to-Serial Adapter with PL2303 Chipset
This USB 2.0 to RS232 adapter converts a standard USB port into a DB9 female serial connection for legacy equipment. It is built around the Prolific PL2303 chipset and supports Windows 11, 10, 8.1, 8, 7, Linux and Mac OS. The ten-foot cable length gives flexibility when positioning devices such as cash registers, modems, scanners, CNC controllers or barcode scanners. No external power supply is required because the adapter draws power directly from the USB bus.
Replaces a Native Serial Port
The adapter adds a serial interface to modern computers that no longer include a built-in DB9 port. It is worth the upgrade when you need to keep using existing RS232 peripherals such as label printers, POS terminals, PLC controllers or industrial scanners without replacing them. The PL2303 chipset delivers a 1 Mbps data rate suitable for typical industrial and commercial serial workloads. It does not work with cutting plotters or SCM devices, so verify your equipment type before switching.
Check Compatibility Before Ordering
Confirm that your peripheral uses a DB9 male connector, because this cable provides a female DB9 socket. Ensure the device operates at standard RS232 voltage levels; the adapter is not designed for specialised protocols such as those used by cutting plotters. Driver installation is required and can be obtained from the Cablecreation website for all supported operating systems. The USB 2.0 male plug must connect to an available USB Type-A port on the host computer.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 81% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 10 ft cable need between the USB port and the DB9 device?
The 10 ft length provides ample reach for typical desk or rack setups; route the cable to avoid sharp bends near the connectors.
Which driver must be installed before plugging the PL2303 adapter into Windows 11?
Download the PL2303 driver from the CableCreation website, run the installer, then connect the adapter; the COM port will appear in Device Manager.
When should the gold-plated DB9 female connector be inspected or replaced?
Inspect the connector pins for oxidation or bent contacts after heavy use; replace the cable if intermittent data errors appear.
More in VGA Monitor Cables
Similar items
Kramer Electronics C-BM/BM-3 BNC Coaxial Video Cable 3 ft 75 Ohms
- 1 x BNC Male Video…
- C-BM/BM
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black





