WaveShare SN65HVD230 CAN Board 3.3V Transceiver
An accessory board with a 3.3V CAN transceiver for connecting microcontrollers to a CAN network
- Connect microcontrollers to CAN networks via onboard SN65HVD230 transceiver
- Pin-compatible with PCA82C250 for drop-in replacement designs
- Operates from 3.3V supply simplifying low-voltage system integration
- Built-in ESD protection safeguards transceiver against electrostatic discharge
- Accessory board form factor eases prototyping and embedded deployment
CAN transceiver accessory board
The WaveShare SN65HVD230 board provides a 3.3 V CAN transceiver for linking microcontrollers to a CAN network. Its pinout matches the PCA82C250 footprint for drop-in compatibility. Onboard ESD protection helps guard the transceiver against transient spikes. The board targets developers adding CAN connectivity to 3.3 V logic systems.
Low-power 3.3 V operation
The transceiver runs from a single 3.3 V supply, keeping power draw minimal in typical use. No active cooling is required, so the board adds no audible noise to the design. ESD protection handles common discharge events without extra components. The compact accessory suits space-constrained prototypes and permanent installations alike.
Sustained bus communication
Under continuous CAN traffic the transceiver maintains signal integrity within its specified voltage range. The 3.3 V supply rail must remain stable during extended sessions to avoid communication errors. ESD protection remains effective across repeated transient events. The board is not suited for 5 V logic systems or applications requiring galvanic isolation.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 93% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Processor | |
|---|---|
| Processor | Other |
Questions about this item
How do I wire the SN65HVD230 CAN Board to a 3.3 V microcontroller?
Connect VCC to 3.3 V, GND to ground, then link the board TX to the MCU RX pin and the board RX to the MCU TX pin; the step often missed is adding a termination resistor at each end of the CAN bus
What maintenance or replacement will the SN65HVD230 CAN Board need later?
The board has no moving parts or consumables; only the on-board SN65HVD230 transceiver could require replacement if it suffers an over-voltage event
What limit appears first when the SN65HVD230 CAN Board runs under sustained load?
The 3.3 V supply current and the transceiver thermal rating are the first limits reached during continuous high-speed CAN traffic
More in SFP & SFP+ Transceiver Modules
Similar items
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Ubiquiti Networks UACC-DAC-SFP10-1M 10G SFP+ Direct Attach Cable 1m
- Supported Data Rate…
AddOn J4858C-AO SFP transceiver 1000Base-SX 850nm 550m LC
- Transceiver
- TCP/IP
Finisar Corporation 1000Base-SX SFP Transceiver Module
- SFP
- 1 × 1000Base-SX





