weastlinks RA-2 laptop cooling pad white 2 fans 10 ARGB LEDs 5V 0.21A 3-pin 4-pin 500mm wire 135x50x9mm
A white ARGB memory cooler with two fans, ten addressable LEDs and a 500 mm cable for 5 V motherboard headers
- Accessory categoryCooler
- Fan quantity2
- Product colorWhite
- ARGB lighting with 10 addressable LEDs
- 5 V DC power draws only 0.21 A
- Dual 3-pin plus single 4-pin connectors
- 500 mm cable reaches most motherboard headers
- Compact 135 × 50 × 9 mm aluminium heatsink
ARGB Memory Cooler with Dual Connectors
The Weastlinks RA-2 is a memory heat-sink cooler designed for desktop RAM modules. It fits high, medium and low-profile sticks with single or double-sided chips. Two 5 V ARGB fans and ten addressable LEDs provide synchronised lighting through a standard 3-pin header. The 500 mm cable allows flexible routing inside the case.
Suited for Builders Adding Lighting to RAM
This cooler suits enthusiasts who want ARGB illumination on memory without a liquid loop. It works with bare modules and standard motherboard 5 V ARGB control. Buyers who need active airflow directed at VRMs or chipset areas should look at dedicated board coolers. Systems lacking a 5 V 3-pin ARGB header cannot use the lighting functions.
5 V 3-Pin ARGB Interface Decides Compatibility
The single specification that determines fit is the 5 V 3-pin ARGB connector on the motherboard. Without this header the cooler installs mechanically but the ten LEDs remain dark. The 500 mm lead reaches most ATX and micro-ATX layouts. Verify the header exists before purchase.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 58% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
| Product color | White |
| Size & build | |
| Fan quantity | 2 |
Questions about this item
What are the exact dimensions of the RA-2 cooler so I can confirm clearance above my memory slots?
The cooler measures 135 mm long, 50 mm wide and 9 mm thick, so check that your case and CPU cooler leave at least that much space above the DIMMs.
How do I attach the RA-2 to my memory modules and which step is most often missed?
Clip the cooler onto the top edge of each stick; the step people miss is seating both retention clips fully so the thermal pads make even contact across all 10 ARGB LEDs.
What upkeep will the RA-2 need over time?
Dust the two fans and light guide bar periodically with compressed air; the 500 mm leads and 3-pin/4-pin connectors are fixed, so any cable damage means replacing the whole unit.
More in Laptop Cooling Stands & Fans
Similar items
Cooler Master MNX-SSEK-NNNNN-R1 laptop cooling pad 15" 11.70" x 8.50" x .70
- Notebook Cooler
- Support up to 15-in…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
Lemincrash MF60070V1-C370-S9A laptop cooling fan
- Cooling Fan & Heats…
- Black/Silver
Lemincrash DFS5K12214161N 4Pin DC5V laptop cooling pad
- Cooler
- Notebook





