Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects four SATA drives to a server backplane at 6 Gbps over a 0.5 m SAS cable
This cable connects four SATA drives to a host controller using a single SAS-style 7-pin plug on each end. It is built for administrators who need a short, high-speed link between a backplane and a RAID card in a server chassis. The 0.5 metre length keeps cable routing tidy in dense enclosures. Hot-swap support means drives can be replaced without powering down the system.
The assembly draws no external power and adds no fan noise to the rack. Signal integrity is maintained up to the SATA III 6 Gbps specification across the 1.64 foot run. Because it is a passive copper cable, heat output is negligible and limited to the connectors themselves. No additional power budget is required beyond what the host controller already supplies.
Each end uses a symmetrical straight SATA 7-pin head fitted with a metal latch to resist accidental unplugging during vibration. The four-lane breakout fans out to four individual SATA 7-pin plugs for direct drive attachment. The 0.5 metre option suits tight 1U or 2U trays; a 1 metre variant is also available for larger bays. No angled or right-angle heads are included in this configuration.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Align each 7-pin connector with the drive and motherboard ports, then press straight in until the metal retention clips click; the step most people miss is confirming every clip has latched before routing the cable.
No scheduled maintenance is required; inspect the connectors occasionally for dust or bent pins and reseat them if transfer errors appear.
The 6 Gbps SAS/SATA interface caps throughput first, so sequential reads from 10,000 rpm drives will hit that ceiling before the cable length does.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?