Wilfly 12+4Pin 90° to 2×8Pin PCIe 5.0 Cable 10cm
Converts two 8-pin PCIe connectors into a 12+4-pin ATX 3.1 plug with a 90-degree positive orientation for RTX 5090 series cards
- First connector12+4Pin Male 90 Degree Postive
- Second connector2 × 8Pin Male
- Connector count3
- Product colorBlack
- Overall length10CM
- Converts existing dual 8-pin cables to 12+4-pin GPU power without a new PSU
- 90-degree 12+4-pin plug keeps cable routing tight against the graphics card
- PCIe 5.0 rated for 32 GT/s data-link speed on next-gen cards
- 16 AWG sleeved conductors handle 600 W delivery for RTX 5090-class GPUs
- Eliminates daisy-chain connectors for cleaner cable management and stable power distribution
Ready for RTX 5090 power delivery
This 12+4Pin adapter cable converts two existing 8-pin PCIe connectors into the new 16-pin ATX 3.1 interface. It lets builders run an RTX 5090 or upcoming 6000-series graphics card on a current 800W power supply without buying a new unit. The 90-degree positive connector eases routing in tight cases.
Sleeved 16AWG conductors handle high current
Heavy-gauge 16AWG wires and full sleeving keep voltage drop low and heat in check under sustained loads. The PCIe 5.0 rated design supports 32GT/s data link speeds while maintaining stable power delivery. No daisy-chain connectors are required, reducing resistance points and improving airflow around the GPU.
Clean routing with 90-degree orientation
The right-angle 12+4Pin plug sits flush against the card, preventing cable stress and clearance issues near side panels. Each 10cm tail reaches the PSU's native 8-pin ports without excess slack, simplifying cable management. Three connectors in total provide a direct, tidy link between power supply and graphics card.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
| Ports & slots | |
| First connector | 12+4Pin Male 90 Degree Postive |
| Second connector | 2 × 8Pin Male |
| Connector count | 3 |
| Size & build | |
| Overall length | 10CM |
Questions about this item
How do I install the 12+4Pin 90° connector on the RTX 5090 without forcing it?
Align the 90-degree positive key with the GPU socket, push straight in until the latch clicks, and route the 10 cm sleeve so the two 8-pin plugs reach the PSU without tension.
What upkeep will the 16AWG sleeved cable need over time?
Inspect the 12+4Pin and both 8-pin connectors for dust or melted pins every few months; reseat if discoloration appears, otherwise no scheduled replacement is required.
At what load does the 32 GT/s data link become the limiting factor?
The 5.0 PCIe link handles 32 GT/s continuously; the first limit under sustained use is the 800 W PSU rating, not the cable’s signal integrity.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





