Wilfly PCIe 3.0 x16 150mm EMI Shielded Riser Cable
A 150 mm PCIe 3.0 x16 riser cable with EMI shielding for vertical GPU mounting
- Cable length5.9 in / 150 mm
- First connector1 x PCI Express 3.0 x16 female (to Add-in PCIe Card)
- Second connector1 x PCI Express 3.0 x16 male (to M/B PCIe Slot)
- Connector count2
- Product typeInternal Power Cables
- Product colorBlack
- EMI shielding reduces signal interference
- 150 mm length suits compact vertical GPU mounting
- PCIe 3.0 x16 supports up to 16 GB/s bandwidth
- Flexible cable eases routing in tight cases
- Rigid PCB with standoffs secures the GPU firmly
Wilfly PCIe 3.0 x16 Riser Cable
This 150mm EMI-shielded extender connects a graphics card to a motherboard slot at PCIe 3.0 x16 speeds. The flexible black cable uses a straight female-to-male layout for clean vertical GPU mounting. Rigid PCB ends and included standoffs keep the connection stable inside the case.
Suits vertical GPU builds needing a short.
Builders who need a longer cable for horizontal routing or a right-angled connector should look elsewhere. Systems that require PCIe 4.0 or 5.0 bandwidth will not reach those speeds with this 3.0 part.
PCIe 3.0 x16 interface sets the bandwidth ceiling
The link runs at 3.0 with 16 lanes, so maximum throughput stays at the 3.0 specification. Any GPU installed will operate at that generation limit regardless of its own capability.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Internal Power Cables |
| Product color | Black |
| Ports & slots | |
| First connector | 1 x PCI Express 3.0 x16 female (to Add-in PCIe Card) |
| Second connector | 1 x PCI Express 3.0 x16 male (to M/B PCIe Slot) |
| Connector count | 2 |
| Size & build | |
| Cable length | 5.9 in / 150 mm |
Questions about this item
Will the 150 mm riser let me keep my existing PCIe 3.0 x16 graphics card when I move it to a vertical mount?
Yes, the cable carries a full PCIe 3.0 x16 link so the card runs at the same 3.0 speed and 16 lane width as it would directly in the slot.
How can I verify the riser is delivering the full x16 bandwidth after I install it?
Check the link width and speed in GPU-Z or your motherboard BIOS; both should show x16 and Gen 3.0 when the card is under load.
Does the package include any mounting brackets or standoffs, or do I need to buy them separately?
The cable comes with a rigid PCB and standoffs for the vertical mount; no extra brackets are required.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





