Wilson Electronics, Inc. 971116 N-Male Crimp Connector for RG-58 Cable
Crimp-on N-Male connector for RG-58 coax cable, solder pin to centre conductor
- N-Male crimp fits RG-58 coax for secure antenna connections
- Solder center pin for reliable low-loss signal path
- Model 971116 designed for custom RG-58 cable assemblies
- Crimp-on installation lets you build or repair cables on site
- New Wilson Electronics connector ensures consistent RF performance
Connector Type & Cable Match
This Wilson Electronics N-Male crimp connector is engineered for RG-58 coaxial cable. It provides a secure termination point for custom cable assemblies or repair work on existing runs. Installers and hobbyists use it to create reliable RF connections without factory pre-crimped ends.
Fit For Custom Builds, Not Pre-Made Leads
The part suits anyone building or repairing RG-58 feedlines who needs to crimp their own N-Male interface. It is not required for users connecting Wilson's own pre-crimped extension cables, as those ship ready to install. Buyers needing a different connector gender or a match for thicker cable series should select an alternative part.
Centre-Pin Soldering Required
The connector uses a crimp sleeve for the outer conductor and requires the centre conductor to be soldered to the pin for optimal signal integrity. This assembly step demands a soldering iron and basic RF termination skill. Ensure your tooling and workflow accommodate this solder joint before ordering.
How it compares
Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 93% of the 9,265 comparable items (median $17.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 1.36 kg |
| Package size | 102 × 76 × 25 mm |
Questions about this item
What RG-58 coaxial cable do I need to crimp this 971116 N-Male connector onto?
This 971116 connector is designed for RG-58 cable. You supply the RG-58 coax, strip the jacket and braid, insert the centre conductor into the pin, then crimp the ferrule over the braid.
Can I use this 971116 connector to repair an existing Wilson RG-58 extension that already has factory crimps?
Yes. The supplier notes their RG-58 extensions come pre-crimped, so this 971116 is only needed if you are using your own cable or re-crimping a damaged end on an existing run.
How do I verify the 971116 crimp is sound after installation?
Inspect the crimp ferrule for a uniform hexagonal impression, confirm the centre pin is soldered to the conductor with no excess solder, then check for continuity between pin and outer body with a multimeter — there should be none.
More in Charging Stations & Cables
Similar items
Zonet Micro USB Cable 5 ft 5V 3A for JBL Speakers
- No Compatible Phone…
- No Compatible Phone…
Mophie 401305902 15W wireless charging pad
- Universal
- Smartphones, iPhone…
JUKEKUL JKK-USB01 Coiled Lightning Cable 3ft Grey 2.4A 2-Pack
- iPhone 14/13/12 Pro…
- iPhone 8
Nebite USB-C to Lightning Cable 2-pack 3 ft MFi Certified White
- iPhone 14, iPhone 1…
- iPhone 8





