Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2-input DVI switch lets one monitor share two sources with EDID memory for sub-two-second switching at up to 2560×1600
This WRIARICH DVI switch connects two DVI sources to a single DVI display. It suits users who need to share one monitor between a PC, laptop, DVR or projector without unplugging cables. The unit handles single-link DVI signals only and does not support dual-link DVI sources.
The switch weighs 0.522 kilograms and draws power from the connected devices, so it adds no fan noise or extra heat to the setup. Switching between inputs typically completes within two seconds, though actual time varies with the attached display. No external power supply is required for normal use.
Both inputs and the output store EDID data, letting the switch remember the last active source after a power loss. Inputs and output are compatible with HDMI signals through passive adapters, but the device will not work with 2560 x 1600 resolution signals. Maximum supported resolution is 1600 lines.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | VPFET |
| Model name | GuangDa |
| Part number | GuangDa |
| Product type | DVI |
| Ports & slots | |
| Port count | 2 |
| Input ports | 2 |
| Size & build | |
| Product weight | 0.522 kg |
Connect each source to one of the two input ports with a DVI cable, then run a DVI cable from the output port to your monitor. Select the active input using the front-panel button.
The switch handles DVI signals up to 2560 x 1600 at 60 Hz. It does not pass Dual-Link DVI, so resolutions above that require a different switch.
The unit does not support Dual-Link DVI signals, so 2560 x 1600 at 60 Hz is the maximum resolution it can pass continuously.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?