Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.2 m USB 3.0 cable linking Type-A to Micro-B with M2 panel-mount screws, delivering 4.8 Gbps throughput and backward compatibility with USB 2.0 and 1.1
Cable Length 1.2M
This xiwai cable connects a USB 3.0 Type-A host to a Micro USB 3.0 Type-B device such as an external hard drive or mobile phone. The 120 cm length suits desktop or bench use. The Micro B plug includes two M2 panel-mount screws so the connector can be secured to an enclosure or bracket, preventing accidental disconnection during vibration or movement.
When both host and device support USB 3.0 the link runs at up to 4.8 Gbps, ten times the 480 Mbps ceiling of USB 2.0. The cable remains backwards compatible with USB 2.0 and USB 1.1 hosts and devices, falling back to their lower speeds automatically. No active circuitry is described, so performance depends on the quality of the connected ports and the total cable length in the chain.
Plug the Type-A end into the host and the Micro B end into the device, then tighten the two M2 screws into the panel threads to lock the connector in place. The only common issue is thread mismatch: the screws are M2, so the mounting holes must be tapped for that size. If the panel uses a different thread the screws will not engage and the strain-relief benefit is lost.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
| Ports & slots | |
| Connection type | Micro USB to USB A |
The cable is passive and carries only the power the host and device negotiate; it adds no active circuitry that would produce heat or increase draw beyond the USB 3.0 specification.
The host needs a standard USB 3.0 Type-A port and the device needs a Micro USB 3.0 Type-B receptacle with matching M2 mounting holes.
The cable is backward compatible with USB 2.0 and 1.1, but the M2 screws require a device chassis that has threaded mounting holes; a plain Micro B port will not accept them.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?