YEPLOOK 18+10Pin to 24Pin ATX Internal Power Cable 60CM
Connects Corsair Type 4 modular PSUs to 24-pin ATX motherboards using an 18+10-pin 18AWG flat cable 60 cm long
- Product colorBlack
- Compatible with Corsair CX-F white series PSUs
- Works with Corsair RM, RMx, RMi white series units
- Fits Corsair Type 4 black modular power supplies
- 18AWG flat cable keeps routing tidy inside the case
- 60cm length reaches full-size ATX motherboards easily
Direct PSU-to-motherboard link
This YEPLOOK cable bridges an 18+10-pin modular PSU socket to a standard 24-pin ATX motherboard header. It targets builders who own a compatible Corsair unit and need a clean, 60 cm white flat run between the power supply and the board.
Replaces the stock black Type-4 loom
The 18 AWG flat ribbon supplants the round cables shipped with CX-F, RM, RMx, RMi, RM-e, AX and RM Platinum units listed in the compatibility table. Swapping is worthwhile when the original length or colour clashes with a white-themed build or when routing demands a slimmer profile.
Steady delivery under continuous draw
The 18 AWG conductors maintain voltage stability across the full 60 cm span during sustained loads typical of 550 W to 1600 W Corsair platforms. Builders using non-listed modular PSUs should avoid this cable, as pin-out mismatches can damage components.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Does the 60 cm cable length reach a 24-pin motherboard socket in a full-tower case?
The cable is 60 cm long and designed to connect a Corsair Type 4 modular PSU to a standard 24-pin ATX motherboard connector; measure your PSU-to-socket distance to confirm fit.
Which Corsair PSU modular port does the 18+10-pin end plug into?
Insert the 18+10-pin connector into the PSU's dedicated 24-pin ATX modular port; the keyed design prevents incorrect insertion, but verify your PSU is listed in the compatibility list before connecting.
Will the missing pins on the 24-pin connector affect power delivery?
The absent pins on the 24-pin side follow the default ATX layout and are not required for normal operation; the 18 AWG conductors carry the specified currents for the supported Corsair PSUs.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





