YEPLOOK 6-Pin to 3× Molex 4-Pin Angled Power Cable for Corsair Type 4 PSU, 18AWG 50+15+15cm
Connects Corsair Type 4 PSUs to three Molex devices using 18AWG cable with angled connectors
- Product colorBlack
- Connects three Molex devices from one PSU port
- 6-pin male plugs into Corsair Type 4 modular supplies
- 18AWG tinned copper wire rated UL1007 for durability
- Angled connectors simplify routing in tight cases
- 50+15+15cm total length reaches multiple drive bays
Corsair Type 4 modular PSU cable
This 6-pin to triple Molex cable connects Corsair AX1600i, AX1000 and AX850 Titanium Type 4 modular power supplies to legacy peripherals. The 18 AWG UL1007 tinned copper conductors are heat resistant and durable. Two unused pins on the 6-pin connector are normal and not a defect. Buyers must confirm their exact PSU model before purchase because pinouts differ between brands and series.
Build integration and cable routing
The 50 cm lead from the PSU splits into three 15 cm branches for drives, fans or older optical devices. Angled Molex heads reduce strain in tight drive bays and the flexible jacket simplifies cable management. The harness frees a single peripheral port to serve up to three Molex devices. Systems without Molex peripherals or with non-Corsair Type 4 units cannot use this cable.
Capacity and headroom
Each 18 AWG branch delivers sufficient current for typical hard drives, cooling fans and legacy optical drives. The three-device split shares the single 6-pin rail, so total draw must stay within the PSU peripheral rating. Very high-current accessories or more than three devices will exceed the harness design.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How many Molex devices can I run from the single 6-pin PSU connector?
The cable splits one 6-pin Type 4 connector into three Molex 4-pin female plugs, so you can power up to three drives or fans from one modular port.
Will the 18AWG wires handle continuous load from multiple hard drives without overheating?
The UL1007 tinned-copper 18AWG conductors are rated for the current drawn by typical Molex peripherals and are heat-resistant for sustained operation inside a case.
Which Corsair power supplies accept the 6-pin end of this cable?
It fits Corsair Type 3 and Type 4 modular PSUs including AX1600i, AX1000, AX850 Titanium, HX1200i, HX1000i, HX850i, HX750i, HX650i, HX550i, HX1050, HX850, HX750, HX650 and RM series units.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





