YEPLOOK 6Pin to 3 SATA Power Cable 18AWG 50+15+15CM Corsair HX650 HX750 HX850 HX1050
Connects three SATA drives to a Corsair Type 4 modular PSU using 18 AWG wire with 50 cm, 15 cm and 15 cm branches
- Product colorBlack
- Connects three SATA drives from one 6-pin PSU port
- 18AWG UL1007 wire handles sustained power delivery
- 50 cm lead plus two 15 cm branches aid routing
- Compatible with Corsair Type 4 and Type 3 modular PSUs
- Straight 6-pin plug fits HX650 HX750 HX850 HX1050 Gold units
Cable purpose and audience
This YEPLOOK cable splits one 6-pin modular PSU connector into three SATA power plugs for SSDs, hard drives or riser cards. It is built for owners of Corsair Type 3 and Type 4 modular power supplies who need extra SATA connections without replacing the PSU. The 18AWG UL1007 conductors handle the load reliably in standard PC builds.
Who it suits and who it does not
Builders using Corsair HX650, HX750, HX850, HX1050, AX760i, AX860i, AX1200i, AX1500i, HX750i, HX850i, HX1000i, HX1200i or compatible RM units can connect up to three SATA devices from a single 6-pin port. Systems with non-Corsair modular PSUs, or Corsair units outside the listed Type 3 and Type 4 families, cannot use this cable because pinouts differ and damage may occur.
Deciding specification
The cable carries a 6-pin male connector on the PSU side and three SATA female connectors spaced 50 cm, 15 cm and 15 cm apart. If your modular PSU is not in the guaranteed compatibility list, this cable will not work safely.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What PSU connector and cable length does the 6-pin end need?
The cable plugs into a Corsair Type 4 or Type 3 modular PSU using a 6-pin connector, with a 50 cm lead from the PSU to the first SATA connector.
How do I install the cable without reversing the 6-pin plug?
Align the 6-pin connector with the PSU’s modular port — the empty NC hole matches the pinout — then press straight in until it clicks; forcing it backwards can bend pins.
When should I replace the 18AWG SATA power cable?
Replace it if the insulation cracks, the wires stiffen from heat, or the SATA connectors no longer latch securely after repeated drive swaps.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





