YEPLOOK 6Pin to 3x Molex IDE 4Pin Angled internal power cable
Connects a Corsair CX modular PSU to three Molex peripherals using 18 AWG wire with angled plugs
- Product colorBlack
- Connect legacy drives using one modular port
- 18 AWG tin-coated copper resists heat and aging
- Angled 6-pin plug eases routing in tight cases
- 50 cm main lead plus two 15 cm branches
- Tested for Corsair CX 750, 650, 600, 550, 500, 450, 430 modular PSUs
6Pin to Triple Molex Adapter Cable
This YEPLOOK cable converts a single 6Pin modular output into three Molex IDE 4Pin connectors. It is built for owners of Corsair CX series modular power units who need extra peripheral power for drives or fans. The 18AWG tin-coated copper wire meets UL1007 standards for heat resistance and durability.
Suits CX Modular PSU Builders
It fits CX750, CX650, CX600, CX550, CX500, CX450 and CX430 modular power supplies only. The angled 6Pin plug has two empty pin positions by design, not defect. Builders using other brands or non-modular units should look elsewhere, as mix-use may cause damage.
50 cm Lead With Two 15 cm Branches
The main run measures 50 cm before splitting into two 15 cm tails, giving enough reach for typical case routing. Three Molex connectors share the one 6Pin source, so total draw must stay within that rail’s limit. It handles standard peripheral loads but is not a high-current splitter for multiple power-hungry devices.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Do I need a modular Corsair CX power supply with a free 6-pin peripheral port to use this cable?
Yes, the cable plugs into a 6-pin peripheral socket on a compatible Corsair CX modular PSU such as the CX750, CX650, CX600, CX550, CX500, CX450 or CX430.
Can I keep my older IDE hard drives and 4-pin Molex case fans when I install this cable?
The cable provides three standard 4-pin Molex connectors spaced 15 cm apart, so legacy PATA drives and fans can be powered alongside newer components.
How can I confirm the cable is seated correctly after routing it behind the motherboard tray?
Check that the 6-pin male end clicks fully into the PSU's peripheral port and that each angled 4-pin Molex connector locks onto its device; the two empty pins on the 6-pin plug are normal by design.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





