YEPLOOK 8Pin to 4+4Pin CPU Cable 60cm 18AWG
Connects a Corsair modular PSU to an EPS motherboard socket using 60 cm 18 AWG wire
- Product colorBlack
- Connects Corsair modular PSUs to motherboard EPS sockets
- 60 cm length suits mid-tower cable routing
- 18 AWG tin-coated copper resists corrosion
- Detachable 4+4 pin design fits 8-pin or 4-pin CPU headers
- UL1007 rated wire meets chassis-wiring safety standards
Compatible PSU cable for Corsair RM and CX series
This YEPLOOK internal power cable connects a Corsair modular PSU to a motherboard EPS socket. It is built for the RM750i, RM850i, RM1000i, RM750, RM850, RM750x, RM850x, CX550F, CX650F and C750F models. The 60 cm length suits standard ATX chassis layouts. Builders using other PSU brands or series should not use this cable.
Thermals and power handling
The cable uses UL1007 18AWG tin-coated copper conductors rated for the current delivered by the listed Corsair units. Flexible insulation allows tidy routing without sharp bends that could stress the wires. No active cooling or fan interaction is involved; the cable runs passively inside the case. Power draw and noise remain entirely dependent on the PSU and system components.
Build quality and daily use
Male ATX 8-pin plugs into the PSU side while a detachable 4+4-pin EPS connector fits the motherboard. The split design lets the 4-pin portion slide off for boards that only need a 4-pin EPS connection. Both ends are keyed to prevent mis-insertion. The cable is not interchangeable with PCIe 8-pin connectors and must not be used for graphics cards.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How do I install the 8Pin-to-4+4Pin CPU cable, and which step is often done wrong?
Plug the ATX 8Pin male end into the PSU modular port and the detachable EPS 4+4Pin male end into the motherboard CPU socket; the common mistake is inserting a PCIe 8Pin into the PSU side instead of the ATX 8Pin.
What maintenance or replacement will this 18AWG UL1007 cable need later?
No scheduled maintenance is required; inspect the tin-coated copper conductors and connectors for corrosion or loose pins during routine builds and replace the cable if any damage appears.
What limit appears first on this 60 cm cable under sustained load?
The 18AWG gauge sets the current-carrying limit; sustained loads near the PSU-rated wattage for the supported Corsair RM and CX units will hit the wire’s thermal rating before the 60 cm length adds measurable voltage drop.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





