YEPLOOK PCIe 8Pin 6+2Pin Sleeved 60cm Cable for Corsair HX Type 4
A 60 cm sleeved PCIe cable with a modular 8-pin PSU connector and a 6+2-pin GPU plug, built from 18 AWG tinned copper for Corsair HX Type 4 power supplies
- Cable length1.96 ft (0.6m)
- Product colorBlack
- Tinned copper wire resists oxidation for longer cable life
- Nylon braided sleeve allows tight bends and clean routing
- 60 cm length fits compact builds without excess slack
- 6+2 pin design works with 6-pin or 8-pin GPU sockets
- Rated for up to 800 W with modern graphics cards
What this cable is and who it fits
This is a YEPLOOK PCIe 6+2Pin power cable built for Corsair HX Platinum Type 4 modular supplies including the HX750, HX850, HX1000 and HX1200. It connects a PSU 8Pin port to a graphics card 8Pin or 6Pin socket using UL1007 18AWG tinned copper wire wrapped in a nylon braided net. The 60cm length suits standard tower builds.
Who should use it and who should not
Builders replacing or extending a GPU power lead on the listed Corsair HX Platinum Type 4 units will find the correct pin layout and 800W rating. It is not for any other power supply brand or Corsair series; mixing cables can cause damage. Buyers with non-Type 4 modular PSUs must look elsewhere.
The spec that decides compatibility
The cable carries a PSU-side 8Pin connector with one empty pin position, which is the standard Type 4 pinout, and a GPU-side 6+2Pin plug that slides to fit either 6Pin or 8Pin graphics card sockets. Verify this exact pin arrangement against your original cable before installing.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YEPLOOK |
| Product color | Black |
| Size & build | |
| Cable length | 1.96 ft (0.6m) |
Questions about this item
How do I install this PCIe 6+2 pin cable into my Corsair HX Type 4 PSU and avoid the common pin-layout mistake?
Connect the PSU-side 8-pin plug into a Corsair HX Type 4 modular port; one pin position is intentionally empty — this is the default design, not a defect. Then slide the 2-pin section on or off the GPU-side connector to match your card's 6-pin or 8-pin socket.
What maintenance or replacement will this 60 cm sleeved cable need over time?
The 18 AWG tinned copper conductors and nylon braid resist heat and ageing; no routine maintenance is required. Replace the cable only if the sleeving frays, a connector becomes loose, or you move to a non-Corsair Type 4 power supply.
What is the first limit I will hit when running a high-end GPU continuously on this 60 cm cable?
The cable is rated for up to 800 W power delivery; sustained loads above that level will exceed the 18 AWG conductor's safe capacity before temperature or length becomes an issue.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





