YEPLOOK PCIe Dual 8Pin 6+2Pin Pigtail GPU Cable Corsair HX-i Type 3 0.60m
Dual 6+2-pin PCIe GPU power cable with pigtail for Corsair HX-i Type 3 PSUs, 0.60 m long, 18 AWG UL1007 wire
- Cable length1.96 ft (0.6m)
- Product colorBlack
- UL1007 18AWG wire resists heat up to 80°C for reliable GPU power
- Flat flexible design eases routing and cuts clutter inside the case
- 6+2 pin connectors slide to fit 6-pin or 8-pin graphics cards
- Pigtail layout powers two GPU connectors from one PSU 8-pin port
- Built for Corsair HX-i Type 3 units including HX1200i, HX1000i, HX850i, HX750i
PCIe GPU Cable for Corsair HX-i Type 3 PSUs
This internal power cable connects Corsair HX1200i, HX1000i, HX850i and HX750i Type 3 modular power supplies to a graphics card. It is intended for builders and technicians who need a direct replacement or an additional GPU power lead for those specific units. The 0.60 m length suits compact routing inside standard chassis. It is not for owners of Corsair Type 1, Type 2 or Type 5 power supplies, nor for any other brand of modular PSU.
18AWG UL1007 wire with flexible flat layout
The cable uses 18AWG tin-plated copper conductors rated to 300 V and an operating range of -30 °C to 80 °C. A flat profile makes bending and cable management straightforward, reducing clutter behind the motherboard tray. One PSU-side 8-pin plug feeds two PCIe 6+2-pin connectors in a pigtail arrangement, with 34 inner wires in total. An unused pin on the PSU connector is a normal design feature, not a defect.
Dual 6+2-pin pigtail for single-cable GPU power
The splitter delivers two 6+2-pin PCIe ends from one PSU port, allowing a graphics card with dual 8-pin or 6-pin sockets to be powered without a second cable run. The 2-pin sections slide on or off to match 6-pin or 8-pin requirements. Compatibility is limited to the listed Corsair HX-i Type 3 models; using it with other units can cause damage.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YEPLOOK |
| Product color | Black |
| Size & build | |
| Cable length | 1.96 ft (0.6m) |
Questions about this item
What PSU-side connector does this cable use, and which Corsair HX-i models is it built for?
It plugs into an 8-pin Type 3 modular port and is made for the HX750i, HX850i, HX1000i and HX1200i power supplies.
How long is the cable, and will its 18AWG flat profile fit behind a motherboard tray?
Total length is 0.60 m with a 20 cm pigtail; the flat 18AWG construction bends easily in tight routing channels.
How do I attach the 6+2 pin to my graphics card, and what mistake should I avoid?
Slide the 2-pin segment onto the 6-pin base for an 8-pin GPU or leave it off for a 6-pin card; do not mix this Type 3 cable with Corsair Type 1, 2 or 5 units.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





