BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
3.5 inch SPI display with 480×320 resolution and ILI9488 driver for Klipper boards
The YINGHUA TFT35 V2.1 is a 3.5 inch LCD display controller designed for 3D printers running Klipper firmware on M4P+CB1 or M8P mainboards. It communicates via SPI using an ILI9488 driver IC and an NS2009 touch controller. The unit connects to the host board through an FPC cable and XH 2.54 terminals for straightforward installation.
The screen provides a 480x320 pixel interface suitable for printer status, menu navigation and basic g-code preview. It operates on a DC 5 V supply shared with the mainboard, drawing minimal current. The SPI interface limits refresh rate compared to parallel or HDMI panels, so full-motion video or high-speed animations are not practical.
This V2.1 revision works directly with CB1 V2.2 boards. Builders using CB1 V2.1 must add an IO2CAN adapter for communication. The kit does not support other controller families or standalone operation without a compatible Klipper host. Verify your mainboard revision before purchasing.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, it supports CB1 V2.1 when paired with the additional IO2CAN module, using the FPC cable and XH 2.54 terminals for connection.
The 3.5 inch screen should show a 480x320 resolution interface driven by the ILI9488 controller, with touch input handled by the NS2009 chip when powered at DC5V.
The box includes one LCD screen; you must supply the FPC cable and, for CB1 V2.1, the IO2CAN adapter separately.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?