Zoom SFP+ Transceiver 850 nm 300 m Lot of 2
Two 10 Gb/s SFP+ transceivers with 850 nm VCSEL emitters for 300 m multimode links
- Product typeTransceiver
- Dual-rate 9.95 to 10.3 GBd supports 1 GbE and 10 GbE links
- 850 nm VCSEL emitter reaches 300 m over OM3 multimode fibre
- SFP+ form factor fits standard switch and router ports
- Class 1 laser safety for compliant deployment
- Lot of two transceivers for paired link installation
Dual SFP+ transceivers for 10 Gb links
This lot contains two SFP+ transceivers designed for 10 Gigabit Ethernet or Fibre Channel connections over multimode fibre. Each module uses an 850 nm VCSEL emitter to reach 300 metres on OM3 cabling. The dual-rate design supports 1 Gb and 10 Gb line rates for flexible deployment.
10.3 GBd maximum data rate
The transceivers operate from 9.95 GBd up to 10.3 GBd, covering standard 10GBASE-SR and 10G Fibre Channel speeds. This single rate window determines compatibility with your switch or host bus adapter ports. Verify that your equipment accepts SFP+ modules within this signalling range before purchase.
Low-power VCSEL operation
Class 1 laser rating means the 850 nm VCSEL emits within safe limits and draws minimal power during normal link activity. Heat output stays low inside a standard SFP+ cage, so no extra cooling is required. Acoustic noise is negligible because the modules have no moving parts.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 92% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Transceiver |
Questions about this item
What does the 10.3 GBd maximum data rate mean once the module is installed in a switch?
The transceiver will carry 10 Gigabit Ethernet traffic at up to 10.3 GBd, matching the line rate of standard 10GBASE-SR links.
Which SFP+ interface standard does the module follow and what reach does it support?
It uses the SFP+ form factor with an 850 nm VCSEL and is rated for 300 m over OM3 multimode fibre.
What physical slot and fibre connector are required to mount the module?
The module plugs into an SFP+ cage and connects via a duplex LC patch cord.
More in SFP & SFP+ Transceiver Modules
Similar items
Ubiquiti Networks UACC-OM-MM-1G-D-2 1 Gbps Multi-Mode SFP transceiver
- Transceiver
- MMF
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
Ubiquiti Networks UACC-DAC-SFP10-1M 10G SFP+ Direct Attach Cable 1m
- Supported Data Rate…
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Brute Networks MGBSX1-BN 1000BASE-SX 550m 850nm SFP transceiver
- Transceiver
- MMF





