Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
40 mm ball-bearing case fan runs on 12 V and draws 0.10 A for compact CPU cooling
The Zyvpee 1606KL-04W-B40 is a 40 mm square case fan with a 10 mm thickness. It runs on 12 V DC power and uses a two-pin connector for simple polarity connection. The black frame houses a ball-bearing motor rated for CPU cooling duties. This non-LED unit suits compact builds or replacement cooling in tight spaces.
Swap this in when an existing 4015-size fan becomes loud, vibrates or stops spinning. The ball bearing handles continuous operation better than sleeve alternatives in similar footprints. The jump is worth it if the current fan runs hot or the bearing whine is audible. It matches the standard 40 mm mounting pattern for direct substitution.
Installation requires aligning the two-pin connector with a matching header on the board or controller. Polarity must be observed so the fan spins in the correct direction. The 10 mm depth fits most 40 mm mounts but verify clearance against nearby components. A common issue is reversed wires causing the fan to run backwards or not start.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | 1606KL-04 W-B40 |
| Model name | 1606KL-04 W-B40 |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 40 × 10MM |
| More details | |
| LED lighting | Non-LED |
Yes, the 40 mm square frame with 10 mm thickness matches the common 40 mm mounting pattern used on many small-form-factor cases and heatsinks.
Align the two pins with the outer two pins of the header — usually ground and 12 V — leaving the sense or PWM pin empty; the fan will run at full 12 V speed.
Ball bearings typically last several years of continuous 12 V operation; replace the fan when noise increases or airflow drops noticeably.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?