Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 90 by 25 millimetre case fan running at 12 volts with a sleeve bearing and two-pin connector
The Zyvpee AD0912HS-A70GL is a 90 by 25 millimetre frame fan that runs on 12 volts and draws 0.25 amps. It uses a two-pin power connector and a sleeve bearing. The unit is designed for CPU cooling in tight chassis spaces where a 90mm footprint is required.
The two-pin interface supplies fixed voltage without a speed signal or PWM input. Fan speed varies only with the voltage applied by the motherboard header or controller. Builders who need closed-loop RPM monitoring or automatic temperature curves cannot use this connector type.
Installation uses standard 90mm screw holes and the two-pin plug fits any matching header. The sleeve bearing is quiet at low voltage but may develop noise or reduced lifespan if the fan is mounted horizontally with the shaft under side load. Check clearance against nearby cables before securing the frame.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | AD0912HS-A70GL |
| Model name | AD0912HS-A70GL |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Sleeve |
| Product dimensions | 90 × 25 mm |
| More details | |
| LED lighting | Non-LED |
The AD0912HS-A70GL is a 90 mm square frame with 25 mm thickness, 12 V and 0.25 A rating, so match those dimensions and voltage to your mounting holes and fan header.
At 12 V the fan draws 0.25 A, which equals about 3 W of power; the motherboard header must supply at least that much current for reliable start-up.
A 2-pin connector supplies constant 12 V with no PWM or voltage-control wire, so the fan runs at full speed unless the motherboard lowers the header voltage.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?