Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 by 25 mm DC blower fan with a mixed ball-and-sleeve bearing runs on 12 V and .33 A through a 3-pin connector
The Zyvpee D06F-12B1S1 07B is a 12V DC blower designed for compact CPU coolers and projector housings. Its 60 by 25mm frame fits tight ducting where axial fans cannot direct airflow effectively. Builders maintaining small-form-factor systems or replacing original projector cooling modules will find the form factor matches the original specification.
The fan draws 0.33A at 12V, delivering focused static pressure through a narrow outlet. It handles targeted component cooling in restricted spaces but runs out of volume when asked to ventilate an entire chassis. The mixed ball-and-sleeve bearing supports continuous operation at the rated voltage without extra headroom for over-volting.
A standard three-pin connector supplies power and a tachometer signal for speed monitoring. Voltage control is the only regulation method; PWM headers will run the blower at full speed unless the motherboard supports DC-mode switching. The lack of a fourth pin means no duty-cycle control, so low-speed quiet operation depends entirely on the board’s voltage-range capability.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | D06F-12B1S1 |
| Model name | D06F-12B1S1 |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Bearing design | 1 Ball, 1 Sleeve |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | Non-LED |
The fan measures 60 mm square by 25 mm thick, matching the standard 60 mm mounting pattern used on many legacy CPU coolers.
Connect the 3-pin connector to a 12 V header; the fan should spin and draw approximately .33 A, which you can verify in BIOS or monitoring software.
The box contains only the blower unit itself; screws and any adapter cables must be purchased separately.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?