Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 70 mm case fan with ball bearing, 12 V power and a 3-pin connector for CPU cooling
The Zyvpee DA07020B12U SFAR is a 70 by 20 millimetre case fan built for CPU cooling in compact chassis. It runs on 12 volts and draws 0.7 amps through a three-pin connector. The black frame carries no LEDs, so it suits builds that prefer a clean look without lighting.
This model replaces older 7020 fans that use sleeve bearings and two-pin power. The ball bearing reduces friction and extends service life, while the third pin delivers speed feedback to the motherboard. The jump is worth it when your current fan rattles, runs hot or lacks RPM reporting.
Verify that your case or heatsink has 70 millimetre mounting holes and a 20 millimetre depth clearance. Confirm the motherboard or fan controller provides a three-pin DC header; a two-pin header will run the fan at full speed without monitoring. Ensure 12 volt DC power is available on that header.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | DA07020B12U SFAR |
| Model name | DA07020B12U |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 70 × 20 mm |
| More details | |
| LED lighting | Non-LED |
The fan measures 70mm square by 20mm thick, matching standard 70mm case mounts with four corner holes.
Align the three pins with the header's ground, 12V and tach pins; the fourth PWM pin stays empty and the board will still regulate voltage.
Ball bearings typically run for years; replace the fan if noise increases or rotation becomes uneven.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?