Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
80 mm × 25 mm ball-bearing case fan running on 24 V DC at 0.18 A with a 2-pin connector, suited for Cisco PIX525 cooling
The Zyvpee DFB0824HH is an 80 by 25 millimetre case fan that runs on 24 volt direct current. It draws 0.18 amperes through a two pin connector and uses a ball bearing for shaft support. The unit is intended for equipment such as the Cisco PIX525 where a slim 80 mm footprint is required. No LED lighting is fitted.
At the rated 24 volts and 0.18 amperes the fan consumes approximately four point three watts. The ball bearing design provides consistent rotation with minimal friction over long operating periods. Because the model is specified for inverter cooling duties it is built to move air steadily through restricted channels. Acoustic output will vary with the mounting environment and load.
The package contains only the fan assembly itself; no screws, adapters or speed control cables are supplied. The two pin power lead expects a compatible 24 volt header or solder point on the target device. Builders needing PWM control, three or four pin connectors, or additional mounting hardware must source those separately. The physical dimensions suit chassis cutouts matching the 80 by 25 millimetre standard.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | DFB0824HH |
| Model name | DFB0824HH |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 80 × 25 mm |
| More details | |
| LED lighting | Non-LED |
Align the four screw holes on the 80 mm frame with the case or Cisco PIX525 chassis, secure with M3 screws, then plug the 2 pin connector onto the 24 V header matching the red wire to positive and black to negative.
The ball bearing is the wear item; listen for new rattling or a drop in airflow that signals the bearing is drying out and the fan should be swapped.
Sustained operation at the rated 24 V 0.18 A will hit the ball bearing temperature ceiling first, causing lubricant breakdown before the motor windings overheat.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?