Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
80 mm sleeve-bearing case fan runs at 3000-3499 RPM with 25-30 dBA noise on a 12 V 2-pin connector
The Zyvpee DFB802512H is an 80 mm square frame fan designed for standard case mounting points. It runs on a 12 V DC supply and draws 2.0 W through a two-pin connector. The black, non-LED housing suits builds that prefer a subtle look.
The two-wire, two-pin plug connects directly to any 12 V DC fan header on a motherboard or fan controller. No PWM signal wire is present, so speed is managed by varying the supply voltage. The 25 mm thickness clears most tight side-panel or drive-cage locations.
At full voltage the fan spins between 3000 and 3499 RPM while producing a noise level of 25 to 30 dBA. The sleeve bearing keeps running noise low during typical operation. Power draw remains at the rated 2.0 W under normal load.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | DFB802512H |
| Model name | DFB802512H |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 3000-3,499 RPM |
| Airflow rate | Variable |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Sleeve bearing |
| Product dimensions | 80 × 80 × 25 mm |
| Compatibility | |
| Compatible with | Case |
| Environment & compliance | |
| Operating noise | 25–30 dBA |
| More details | |
| LED lighting | Non-LED |
Sleeve bearings typically wear faster than ball bearings at sustained high speeds, so expect a shorter lifespan under constant 3499 RPM operation.
The fan stays between 25 and 30 dBA, and the 2.0 W draw keeps heat output low even during all-day operation.
Yes, it requires a standard 2-pin 12 V fan header on the motherboard or controller.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?