Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
30 mm ball-bearing case fan runs on 12 V at 1.3 W with a 2-pin connector
The Zyvpee DFS301012M is a 30 mm square frame fan designed for tight enclosures such as set-top boxes, routers and hard-disk housings. It runs on 12 V and draws 1.3 W through a simple two-pin power connector. The ball-bearing motor and black non-LED housing keep the profile low at 30 by 10 mm. This fan suits builders who need targeted airflow in confined spaces.
The two-pin layout drops straight into legacy headers that lack PWM control, making the swap straightforward on older boards or embedded gear. Ball bearings reduce the rattle that develops in sleeve designs after extended heat cycles, so the upgrade is worth it when acoustic consistency matters more than variable speed. Buyers who need software fan curves or a three- or four-pin header will not find that control here.
The 30 mm hole pattern aligns with standard 3010 cut-outs, so no adapter brackets are required. Two wires keep cable routing simple in cramped chassis, and the 1.3 W draw leaves ample headroom on a shared 12 V rail. Because the unit has no integrated lighting or speed signal, it frees up header space for other monitored fans. Ensure the host device supplies a constant 12 V source, as no voltage regulator is onboard.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | DFS301012M |
| Model name | DFS301012M |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 30 mm |
| Bearing design | Ball |
| Product dimensions | 30 × 10 mm |
| More details | |
| LED lighting | Non-LED |
Yes, the fan measures 30 by 10mm and matches the standard 3010 mounting holes used on set-top boxes, routers and hard-disk enclosures.
Plug the two wires onto a 12V DC header matching the polarity marked on the fan; the common error is reversing the positive and negative leads, which prevents the fan from spinning.
The ball bearing is rated for long life in continuous 12V operation; expect to replace the fan only if noise increases or airflow drops after extended use.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?