Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 mm maglev case fan with 4-pin PWM control, 12 V 3.0 W draw and square frame for server chassis
The Zyvpee GM1206PKVX-A is a 60 by 60 by 20 millimetre axial fan built for the K650T-A00 server chassis. It runs on 12 volts and draws 3.0 watts through a four-pin power connector. The maglev bearing and black non-LED frame target system integrators who need a direct replacement cooler for that specific platform.
The fan ships with a standard four-wire connector that keys into the server’s existing header, so no adapter or soldering is required. Alignment tabs on the housing prevent reverse insertion, and the square mounting holes match the chassis screw pattern exactly. The only common issue is forgetting to route the cable clear of adjacent drive cages before tightening the screws.
Confirm the chassis label reads K650T-A00 and that the current fan measures 60 by 60 by 20 millimetres with a four-pin header. Check that the motherboard or fan controller supplies a 12 volt PWM signal, because the maglev motor expects that control scheme. If the server uses a different form factor or a three-pin header, this unit will not mount or function correctly.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | GM1206PKVX-A |
| Model name | GM1206PKVX-A |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | Maglev |
| Product dimensions | 60 × 60 × 20 mm |
| More details | |
| LED lighting | Non-LED |
Connect the 4-pin connector to the motherboard or fan controller, power on the system, and verify rotation through BIOS fan-speed readout or monitoring software.
The package contains the 60×60×20 mm maglev case fan with its attached 4-pin lead; mounting screws and any fan-hub or splitter cables are not included.
Choose the GM1206PKVX-A B4124.F.GN model rated at 12 V 3.0 W with a 4-pin connector, as specified for the K650T-A00 case.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?