Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Compact 25 mm 5 V Meglev fan spins below 1600 RPM with a two-wire connector
The Zyvpee KD0502PEV1-8 is a 25 mm square, 6 mm thick case fan that runs on 5 V DC and draws 0.8 W. Its two-wire, three-pin connector suits notebook-style headers and tight internal layouts. The black, non-LED frame keeps the visual profile neutral for any build.
A Meglev bearing reduces mechanical contact, helping the fan stay quiet while spinning up to 1600 RPM. The 25 × 25 × 6 mm footprint fits slim chassis, mini-ITX boards and laptop-style coolers where standard 25 mm fans are too tall. Two-pin power means speed is voltage-controlled rather than PWM-regulated.
Swapping a taller 5 V axial fan for this 6 mm unit recovers clearance for memory modules, VRM heatsinks or cable routing. The upgrade is worthwhile when the original fan vibrates, whines or no longer spins freely and the header supplies 5 V on two pins. Builders needing PWM control or higher static pressure should look elsewhere.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | KD0502PEV1-8 |
| Model name | KD0502PEV1-8 MS.N |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Fan size | 25 mm |
| Bearing design | Meglev |
| Product dimensions | 25 × 06MM |
| More details | |
| LED lighting | Non-LED |
The 5 V two-wire connector supplies power only, so speed is fixed at the rated level and cannot be adjusted by the motherboard.
The fan needs a 25 mm by 25 mm mounting area with at least 6 mm of vertical clearance for the frame.
Connect the two power wires to a 5 V header, secure the 25 mm frame with screws, and verify the airflow direction arrows point the right way.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?