Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Compact 40×40×20 mm ball-bearing fan runs on 5 V and 0.4 W for CPU or router cooling
The Zyvpee KD1204PKBX-A is a 40x40x20 mm case fan designed for tight spaces such as small-form-factor CPU coolers or network equipment. It runs on a 5 V supply and draws 0.4 W through a two-pin connector. The black frame and non-LED design keep the appearance neutral. Ball-bearing construction supports continuous operation in always-on devices.
This unit replaces older 4020 fans that use sleeve bearings and develop noise or seizure over time. The jump is worth it when the existing fan rattles, slows under load or fails to spin up reliably at 5 V. Builders maintaining legacy router boards or compact heatsinks gain longer service intervals without changing mounting holes or voltage rails.
Speed is fixed by the supplied voltage because the two-pin connector carries no PWM or tachometer signal. The motherboard or controller cannot modulate RPM or monitor rotation, so thermal curves must be managed by varying the 5 V rail itself. Systems that require automatic fan curves or stall detection need a three- or four-pin header instead.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | KD1204PKBX-A |
| Model name | KD1204PKBX-A |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 40 × 40 × 20 mm |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | Non-LED |
The fan measures 40mm by 40mm with a 20mm thickness, matching the standard 4020 footprint used on many compact CPU coolers.
Align the two wires with the motherboard or controller header; the connector is keyed so it only seats one way — forcing it backwards bends the pins.
Ball bearings typically run for tens of thousands of hours; listen for new rattling or a drop in airflow as the signal to swap it out.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?