Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5 V ball-bearing case fan delivering 10.55 CFM at 28.5 dBA and 5,394 RPM for CPU cooler mounting
The Zyvpee KSB0705HB-A is a 5 V case fan rated at 1.0 A and 5 W. It uses a 4-wire power connector for PWM control and a ball bearing for durability. The black frame carries no LED lighting. It is aimed at builders who need a compact cooler fan for low-voltage headers.
Replacing a 3-wire fan adds automatic speed control through the fourth wire. The ball bearing resists wear better than sleeve types, so the swap pays off when the original fan becomes noisy or fails. The improvement matters most in systems that run the cooler continuously at high RPM.
Mount the fan using the standard holes on your CPU cooler heatsink. Connect the 4-wire plug to the motherboard CPU fan header; the keyed connector prevents reverse insertion. A common issue is forgetting to set the header to PWM mode in BIOS, which leaves the fan running at full speed. Verify the fan spins up and reports RPM after first boot.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | KSB0705HB-A |
| Model name | KSB0705HB-A |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 4 Wires |
| Size & build | |
| Bearing design | Ball |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | No |
Yes, the 4-wire power connector plugs directly into a standard 4-pin PWM fan header for speed control.
Align the four screw holes with the cooler brackets and ensure the airflow arrow points through the fins toward the rear exhaust.
The ball bearing is rated for long life; replace the unit if audible rumble or vibration appears after cleaning dust from the blades.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?