Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 × 10 mm maglev case fan running below 1600 RPM at 5 V and 1.18 W with a 2-pin connector for CPU cooler compatibility
This Zyvpee 50 × 10 mm case fan uses a maglev bearing and runs at up to 1600 RPM on a 5 V supply. It draws 1.18 W through a two-pin connector and is finished in black without LED lighting. The frame is designed to fit CPU cooler mounting points.
Verify that your motherboard or controller provides a 5 V two-pin header for power. Measure the available space on the CPU cooler to confirm the 50 mm square footprint and 10 mm thickness will fit without interfering with surrounding components. The fan has no PWM lead, so speed control depends on voltage regulation.
The bundle supplies the fan and its attached two-wire cable; no additional brackets, screws or software are included. Installation relies on the cooler’s existing mounting hardware. The absence of a third wire means the system cannot read a tachometer signal from this unit.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | MB50100V2-0000-A99 |
| Model name | MB50100V2-0000-A99 |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Maglev |
| Product dimensions | 50 × 10 MM |
| Compatibility | |
| Compatible with | CPU Cooler |
| More details | |
| LED lighting | Non-LED |
The package includes the 50 mm maglev fan with a 2-pin power lead. If your motherboard or controller only has 3-pin or 4-pin headers you will need a 2-pin to 3-pin or 2-pin to 4-pin adapter, which is sold separately.
The MB50100V2-0000-A99 is the single 5 V, 1.18 W model rated below 1600 RPM. It is the only version listed, so select it when you need a 50×10 mm maglev fan for CPU cooling.
At full voltage the fan spins below 1600 RPM, delivering quiet airflow for a 50 mm CPU cooler. Speed will vary with the 5 V supply and any motherboard voltage control you apply.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?